5-Gallon Pour Spout Instructions
This 5-gallon pour spout comes pre-assembled with two threaded adapters. The large black adapter fits on 2-3/4 inch threads, and the yellow threaded adapter fits on 2-1/2 inch threads. Thus to attach it to a bucket that has a threaded cap, first remove the cap from the bucket by unscrewing it. Then screw the spout onto the bucket threads by turning it clockwise until it is tight. But if the black adapter is too large, remove it from the yellow adapter by unscrewing it. Then attach the spout to the bucket by using the yellow thread adapter.
For tint plug type buckets that do not have a threaded cap, do not use either adapter. To attach the spout to this type of bucket, first remove the plug from the bucket. Then remove the black adapter from the yellow adapter by unscrewing it. Then remove the pouring spout from the yellow thread adapter by gently prying it out. Next, push the spout into the bucket hole until it snaps into place.
Our durable pourer spout is made of heavy-duty polypropylene and will last for years. In addition, it can be used with all water-based, latex, or oil-based paints. After using it for water-based or latex paint, simply clean it with soap and water. For oil-based paint, clean it with mineral spirits (do not use turpentine). Further, make sure that no paint is on the spout or adapters after you clean them. Model #30669-00778
For more info, please view the 5-gallon pour spout brochure.